Multi-functional Side Control Bidet Seats

Why Choose Wellblue smart toilet seat cover?

Wellblue integrates smart technology with ergonomic design, offering a spa-like experience at home. Our products are certified by ISO, CE, FC, ERP, UL, ROHS, CM.

Wellblue Multi-functional Side control bidet seats smart toilet cover is our Personal Hygiene Assistant - Smart, Gentle, and Effortless.

4-gear seat temperature adjustment

4-gear flushing temperature adjustment

Note:

Before connecting the filter 3-way connect, the angle valve must be opened to drain for more than 1 minute to remove the grit and dirt from the pipe.

For the water source appliance connected by a detachable hose assembly, it must be replaced with a new hose assembly, and the old hose assembly cannot be reused.

1. Remove the installed toilet seat. If the nut is rusty and cannot be loosened. loosen with screw loosening spray (generally can buy from local market).

Loosen the bolt with an adjustable wrench, etc.

Remove the nut and gasket and remove the seat.

2. Put two fixed rubber expansion tubes into the ceramic hole.

3. Attach the mounting fixing plate to the ceramic body.

Put the stainless steel pressure plate into the opening of the mounting plate. Place the bracket on the ceramic with the opening facing outwards.

Fix the fixed plate on the ceramic with mounting bolts,and adjust the position of the fixed plate according to the right figure.

4. Installation of 3-way filter valve

Close the water inlet valve, and remove the original water inlet pipe. Temporarily connect the new water inlet hose to the water inlet valve,drain the water for about 1 minute, then remove the water inlet hose.

Install the 3-way filter valve to the water inlet valve

The water inlet hose connected to the3-way valve.

5. Installation of the cover body

Align the toilet cover with the slot of the fixing plate, and slowly push it in. After pushing it in place,there will be a "click" sound.

Connect the water inlet PE pipe to the toilet cover and the 3-way filter valve.

Check the gap between the bottom of the lid and the ceramic surface, should not be greater than 5 mm. If more than 5mm, should be in the gap into a suitable plastic block or board before use, otherwise the cleaning nozzle can not reach out.

Open the inlet valve, check each connection, to ensure that there is no leakage.

Plug the power leakage protection plug into the socket, the power indicator lights up.

Test Leakage: Press the test button on the plug, the power indicator should turnoff immediately, then re-start the button,then the power indicator will light up.

Hot Tags: multi-functional side control bidet seats, China multi-functional side control bidet seats manufacturers, suppliers, factory, bidet heated toilet cover, bidet with drying, Multi functional Side Control Bidet Seats, U Shape Side Control Bidet Seats, Warm toilet seat lid, warm water toilet seat lid